Equipment built for performance Hagstrom drill rigs and service vehicles support the efficient and reliable delivery of critical drilling operations across Australia. Backed by a comprehensive maintenance program and experienced field crews, our fleet is designed to maximise uptime, adapt to changing site requirements, and support the safe delivery of drilling projects across a wide range of complex environments. Diamond Drill Rigs Our fleet of diamond drill rigs provide accurate, high-quality core samples for resource definition, geotechnical assessment, and deeper mineral exploration. Prioritising precision and sample integrity, our diamond drilling capabilities support projects that demand detailed geological insight, reliable data, and consistent performance in challenging ground conditions. Comacchio MC900P Pull Back Force: 120kN Downforce: 80kN Mast Stroke: 5m Winch Capacity: 3,400kg / 600kg Diamond Drill Rigs Comacchio MC900P Deutz TCD 2013 L04 126kW @ 2300rpm Comacchio CT 60 Rotary Head Mast & Feed System Maximum Pull Down: 80kN Maximum Pull Up: 120kN Foot Clamp/Breakout System TMA TN-30 Main Winch Maximum Pull: 3400kg Maximum Pull: 3400kg TMA WL-22 GF6 Wireline Winch Maximum Pull: 600kg Maximum Pull: 600kg Triplex TR 200 Mud Pump Maximum Delivery: 200l/min Maximum Pressure: 45bar Head mounted Rod Loader suitable for up to 8 ½” Pipe Interlocked Rotation Cage Remote Tramming with Alarms FOPS fitted to control panel Pull Back Force: 38kN Downforce: 32kN Rotation Speed: Up to 1,100 RPM Mast Stroke: 3.5m Diamond Drill Rigs KL 151 Rotation Head Maximum High-Speed Torque: 380Nm Maximum Low-Speed Torque: 1300Nm Rotation Speed: 50-1100rpm Mast & Feed System Maximum Pull Back: 38kN Maximum Pull Down: 32kN Capable of angles from vertical to 45 degrees Safety & Features Head-Mounted Rod Loader suitable for up to 8½” pipe Interlocked Rotation Cage Remote Tramming with Alarms FOPS fitted to control panel Downforce: 53.2 kN Mast Stroke: 3.45 m Engine Power: 134kW Maximum Rod Pull: 6m Diamond Drill Rigs John Deere D6068TF250 Mast & Feed System Height (Mast Up): 9.1m Maximum Feed Force: 53.2kN Maximum Rod Pull: 6m Dimensions & Weight Mast Height (Up): 9.10m Drilling Capacity Safety & Features Rod Presenter Kit Austex Automatic Breakout Assembly Rod Spinner (BQ-PWT) Rotation Safety Cage Fire Suppression System Emergency Stops Directional Drilling Capability Certified FOPS Canopy Boart Longyear LF70 Downforce: 58kN Mast Stroke: 2.0m Maximum Rod Pull: 6m Maximum Practical Depth: 895m (NQ) / 542m (HQ) / 357m (PQ) Diamond Drill Rigs Boart Longyear LF70 Mast & Feed System Maximum Feed Force: 58kN Maximum Rod Pull: 6m Dimension & Weight Weight: 5,656kg Mast Height (Up): 10.03m Base Length: 3.3m Base Width: 1.48 Drilling Capacity FMC W11 Water Pump Safety & Features Skid or Heli-Portable Configuration Compact Footprint Designed for Remote Exploration Programs Boart Longyear LF160T Engine Power: 194kW Mast Length: 9m Feed Stroke: 6.7m Drilling Angle: 45°–90° Diamond Drill Rigs Boart Longyear LF160T Cummins QSB6.7 Tier 4 Diesel Mast & Feed System Drilling Angle: 45°–90° Mast Length: 9m Feed Stroke: 6.7m Maximum Rod Pull: 6m Hydraulic Mast Locking System Wireline winch and sheaves located in the front of the mast, inside the rotation barrier. Breakout System 10″ Hydraulic Foot Clamp and Breakout Assembly Hydraulic Clamping and Breaking Device Automatic Inner Tube Presenter FREEDOMᵀᴹ Hands-Free Rod Handling System Rod Alignment Device and Centraliser Pilot Hydraulic Drilling Controls Digital Drilling Data Display Safety & Features FOPS Canopy fitted to control panel Fire Suppression System Secondary Mast Retention Energy Chain Hose Management Starlink Connectivity Downforce: 5.5t Mast Stroke: 3.45m Engine Power: 142kW Maximum Rod Pull: 6m Diamond Drill Rigs Mast & Feed System Height (Mast Up): 9.1m Maximum Feed Force: 5.5t Maximum Rod Pull: 6m Drilling Capacity Safety & Features Radio Remote Tramming Rotating Rod Guard with Interlock FOPS fitted over control panel Pilot Hydraulic Controls Self-Propelled Drill Unit Rod Presenter Kit Austex Automatic Breakout Assembly Directional Drilling Capability Sonic Drill Rigs Our sonic fleet is designed to meet the demands of various operations, ensuring precision and efficiency with every use. By integrating advanced technology with effective on-site performance, our sonic drilling capability supports projects that necessitate cleaner sampling, reduced waste, and reliable results, especially in complex or variable geological environments. Boart Longyear LS250 Pull Back Force: 55kN Sonic Vibration: 0–75Hz Coring Head: Up to 1,000 RPM Winch Capacity: 1,300kg Sonic Drill Rigs Boart Longyear LS250 Cummins QSB4.5 Tier 4i Engine Sonic Rotation Head Boart Longyear MiniSonic Head Frequency: 0–75Hz Rotation Speed: 0–80rpm Diamond Coring Head

Boart Longyear Coring Head Rotation Speed: 0–1,000rpm Direct mounted to sonic head for diamond coring Mast & Feed System Maximum Pull Back: 55kN Maximum Pull Down: 34kN Sliding and Rotating Head Carriage Foot Clamp / Breakout System Rod Presenter suitable for up to 9″ pipe Winch with Jib Boom Maximum Rated Capacity: 1,300kg Winch Limiter Cut-Out Switch FMC W1122 Mud Pump Bredel SPX40 Grout Pump Interlocked Rotation Cage Remote Tramming with Alarms FOPS fitted to control panel Eijkelkamp Fraste MRS XL275 DUO Pull Back Force: 120kN Sonic Vibration: 0–150Hz Coring Head: Up to 950 RPM Mast Stroke: 5.7m Sonic Drill Rigs Eijkelkamp Fraste MRS XL275 DUO CAT C7.1 Tier 4 205kW @ 2200rpm Sonic Rotation Head Eijkelkamp MidRotoSonic Drill Head Oscillator Output Force: 227kN Frequency: 0–150Hz Rotation Speed: 0–140rpm Diamond Coring Head Fraste R02D060 Rotary Head Rotation Speed: 0-950rpm Mast & Feed System Maximum Pull Up: 120kN Maximum Pull Down: 68kN Dinamic Oil SE27/3 Winch Maximum Pull: 36kN Dinamic Oil SE20/3 Winch Maximum Pull: 10kN FMC L1122 Mud Pump Maximum Delivery: 283L/min Maximum Pressure: 70bar Maximum Delivery: 283L/min Maximum Pressure: 70bar Cat Pumps 5120 Water Pump Maximum Delivery: 18L/min Maximum Pressure: 210bar Maximum Delivery: 18L/min Maximum Pressure: 210bar Bredel SPX40 Grout Pump Safety & Features Interlocked Rotation Cage Remote Tramming with Alarms FOPS fitted to control panel ManipAll Remote Rod Handler (200kg SWL) Automatic Fire Suppression System For fast, clean and accurate samples across the project lifecycle, our Reverse Circulation (RC) rigs deliver reliable performance and precision at depth. Suited to a broad range of exploration and resource definition programs, our RC capability supports efficient sample recovery while helping clients obtain the quality data required to understand subsurface conditions with confidence. Pull Back Force: 33,566kg Downforce: 16,000kg Mast Stroke: 9.14m Winch Capacity: 500 kg WLL Jib Boom with Survey Winch Sullair 20/12 STR Two-Stage Compressor 1,350cfm @ 350psi 1,150cfm @ 500psi Schramm Dual Motor Rotary Head OMVW 500 Motors Mast & Feed System Operating Angle: 45°–90° Head Travel: 9.14m Pull Back Capacity: 33,566kg Pull Down Capacity: 16,000kg Mechanical Mast Locking at 5° increments KL DA554 Rod Handler Rod Retention System Tilting Rod Bin (45 rods / 4.5″) Breakout System Metzke MB550 Dual Breakout Top and Bottom Pneumatic Spanners 12″ Hydraulic Slips Table Safety & Features Sequenced Rotation Guard Fire Suppression System Hydraulic Walkway Mast Access Platform Remote Greasing and Fluid Drain Service Bulkhead Pull Back Force: 32,000kg Downforce: 16,000kg Mast Stroke: 9.00m Engine Power: 708kW Sullair 20/12 STR Two-Stage Compressor 1,350cfm @ 350psi 1,150cfm @ 500psi Schramm Dual Motor Rotary Head OMVW 500 Motors Mast & Feed System Operating Angle: 45°–90° Head Travel: 9.14m Pull Back Capacity: 33,566kg Pull Down Capacity: 16,000kg Mechanical Mast Locking at 5° increments KL DA554 Rod Handler Rod Retention System Tilting Rod Bin (45 rods / 4.5″) Breakout System Metzke MB550 Dual Breakout Top and Bottom Pneumatic Spanners 12″ Hydraulic Slips Table Safety & Features Certified FOPS Canopy Sequenced Rotation Guard Fire Suppression System Hydraulic Walkway Mast Access Platform Remote Greasing and Fluid Drain Service Bulkhead Our support fleet Our extensive support fleet, including both light and heavy vehicles, supports the successful delivery of critical drilling operations across Australia. Purpose-built support vehicles designed to enhance drilling productivity and reduce downtime. Carry essential equipment, tools, and consumables necessary for daily operations. Configured for RC, diamond and sonic drilling campaigns and support complex operational requirements. Mine-spec 4×4 Toyota Hilux and Land Cruiser vehicles configured for safe and reliable operation in demanding site conditions. Equipped to support personnel, equipment and site access requirements across drilling programs. Fitted with In-Vehicle Monitoring Systems (IVMS), providing real-time visibility of driver behaviour, vehicle performance and location. Mobile water trucks mounted on 4×4 platforms for reliable operation in remote and challenging environments. Provide a consistent water supply to support uninterrupted drilling activities. Designed for site mobility and operational flexibility, helping maintain productivity and drilling continuity. Equipped with enclosed Sullair 1150XH air compressors and Ox Engineering TSD1024 boosters for high-capacity air delivery. Provide the compressed air required to support efficient drilling performance across demanding applications. Designed for mobility and reliability in the field, enabling consistent operation across a range of project environments. Flatbed-tracked support vehicles designed to access challenging terrain beyond the reach of conventional trucks and light vehicles. Capable of transporting equipment, materials and essential supplies to remote drilling locations. Support operational continuity by improving site access, logistics and field productivity. Hino and Toyota Hilux field service vehicles configured to support maintenance, servicing and breakdown response in the field. Equipped with specialised tools, diagnostic systems, fire safety equipment, Starlink connectivity, IVMS and Hiab cranes. Enable rapid mobilisation and on-site support to minimise downtime and maintain operational continuity. 4×4 crew cab service vehicles designed to safely transport personnel, equipment and consumables across site. Equipped with accessible bulk fuel and water storage to support field operations. Help maintain drilling productivity by reducing downtime and ensuring crews have the resources required to keep operations moving. Trailers, accommodation & attachments Our comprehensive range of supporting assets optimises logistics, site establishment, workforce accommodation, and end-to-end project delivery, ensuring that crews maintain productivity throughout every phase of a project. Mobile workshop, site office and kitchen facilities designed to support drilling operations directly on the drill pad. Equipped with air conditioning, generators, tooling, large awnings and Starlink communications. Provide a practical and comfortable working environment that supports productivity in remote locations. Custom-designed workshop trailers that function as a central operational hub on site. Provide secure storage for equipment, consumables and specialised tooling. Support efficient project delivery by keeping critical resources readily accessible throughout the duration of a drilling campaign. Our fleet includes rod sloops, water sloops and Freedom Loaders to support efficient drilling operations in the field. Designed to streamline material handling, water supply and drill rod management on site. Freedom Loaders enable remote-controlled, hands-free rod loading and handling on Boart Longyear LF160 rigs, improving operational efficiency and reducing personnel exposure. Accommodation caravans provide comfortable on-site living facilities for remote drilling teams, with capacity for up to eight personnel. Four-berth caravans equipped with air conditioning and television units to support extended field deployments. Explorex Accommodation Combo Trailer includes bathroom, laundry, kitchen and additional sleeping facilities, creating a practical and self-sufficient camp solution. Mine-spec Manitou MT-X 733 4×4 telehandler designed to support a wide range of drilling and site activities. Equipped with hydraulically adjustable tines for efficient handling of equipment, materials and site infrastructure. Built for safe and reliable operation in rough terrain, providing versatile lifting and material handling capability across site. Custom-built by Ox Engineering to provide reliable on-site fuel storage and distribution in remote locations. Bulk fuel capacity of up to 27,000 litres to support extended drilling operations. Reduce refuelling interruptions and help maintain continuous drilling productivity in the field.