Metric system
发布时间:2026-09-20 | 浏览:2
A system of measurement is a frame in which physical qualities (such as length, weight, temperature, etc.) can be quantified with numbers. Among many systems of measurement, the metric system refers to ones, each standardises a set of base units and a nomenclature describing relatively large and small quantities using decimal -based multiplicative unit prefixes (such as kilo and milli ). The International System of Units (SI) is a good example, and there are other widely accepted systems (less popular than SI) mainly used in specific fields, such as the Gaussian units for electromagnetism .
Though rules governing the metric system have changed over time, the modern definition in the International System of Units prescribes the metric prefixes and seven base units: metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol), and candela (cd). [ 1 ]
An SI derived unit is a named combination of base units, such as the hertz (cycles per second), newton (kg⋅m/s 2 ), and tesla (1 kg⋅s −2 ⋅A −1 ). In the case of degrees Celsius (°C), it is a shifted scale derived from the kelvin (273.15 K is equal to 0 °C while 1 K interval is same to the 1 °C interval).
The SI system derives from the older metre-kilogram-second (MKS) system of units, though the definitions of the base units have evolved over time. Today, all base units are defined by physical constants – not by prototypes in the form of physical objects, as they were in the past.
Other metric system variants include the centimetre–gram–second system of units , the metre–tonne–second system of units , and the gravitational metric system . Each has unaffiliated metric units , and some of these systems are still used in limited contexts. Particular non-SI units such as the litre remain widely used. [ 2 ]
The SI system has been adopted as the official system of weights and measures in almost all countries of the world.
A notable outlier is the United States (US). Although it uses the system in some contexts, the US has resisted full adoption, and continues to use different measurement systems . [ 3 ]
Adopting the metric system is known as metrication .
Multiplicative prefixes
In the SI system and generally in older metric systems, multiples and fractions of a unit can be described via a prefix on a unit name that implies a decimal (base-10), multiplicative factor.
The prefix kilo , for example, implies a factor of 1000 (10 3 ), and the prefix milli implies a factor of 1/1000 (10 −3 ). Thus, a kilometre is a thousand metres, and a milligram is one thousandth of a gram. These relations can be written symbolically as: [ 4 ]
The decimalised system is based on the metre , which had been introduced in France in the 1790s. The historical development of these systems culminated in the definition of the International System of Units (SI) in the mid-20th century, under the oversight of an international standards body.
The historical evolution of metric systems has resulted in the recognition of several principles. A set of independent dimensions of nature is selected, in terms of which all natural quantities can be expressed, called base quantities. For each of these dimensions, a representative quantity is defined as a base unit of measure. The definition of base units has increasingly been realised in terms of fundamental natural phenomena , in preference to copies of physical artefacts. A unit derived from the base units is used for expressing quantities of dimensions that can be derived from the base dimensions of the system—e.g., the square metre is the derived unit for area, which is derived from length. These derived units are coherent , which means that they involve only products of powers of the base units, without any further factors. For any given quantity whose unit has a name and symbol, an extended set of smaller and larger units is defined that are related by factors of powers of ten. The unit of time should be the second ; the unit of length should be either the metre or a decimal multiple of it; and the unit of mass should be the gram or a decimal multiple of it.
Metric systems have evolved since the 1790s, as science and technology have evolved, in providing a single universal measuring system. Before and in addition to the SI, other metric systems include: the MKS system of units and the MKSA systems, which are the direct forerunners of the SI; the centimetre–gram–second (CGS) system and its subtypes, the CGS electrostatic (cgs-esu) system, the CGS electromagnetic (cgs-emu) system, and their still-popular blend, the Gaussian system ; the metre–tonne–second (MTS) system; and the gravitational metric systems , which can be based on either the metre or the centimetre, and either the gram, gram-force, kilogram or kilogram-force.
Ease of learning and use
The metric system is intended to be easy to use and widely applicable, including units based on the natural world, decimal ratios, prefixes for multiples and sub-multiples, and a structure of base and derived units.
It is a coherent system with derived units built from base units using logical rather than empirical relationships and with multiples and submultiples of both units based on decimal factors and identified by a common set of prefixes . [ 5 ] : 15–18
The metric system is extensible since the governing body reviews, modifies and extends it needs arise. For example, the katal , a derived unit for catalytic activity equivalent to one mole per second (1 mol/s), was added in 1999. [ 6 ]
The base units used in a measurement system must be realisable . To that end, the definition of each SI base unit is accompanied by a mise en pratique (practical realisation) that describes at least one way that the unit can be measured. [ 7 ] Where possible, definitions of the base units were developed so that any laboratory equipped with proper instruments would be able to realise a standard without reliance on an artefact held by another country. In practice, such realisation is done under the auspices of a mutual acceptance arrangement . [ 8 ]
In 1791 the commission originally defined the metre based on the size of the earth, equal to one ten-millionth of the distance from the equator to the North Pole. In the SI, the standard metre is now defined as exactly + 1 / 299,792,458 of the distance that light travels in a second . [ 10 ] [ 11 ] The metre can be realised by measuring the length that a light wave travels in a given time, or equivalently by measuring the wavelength of light of a known frequency. [ 12 ]
The kilogram was originally defined as the mass of one cubic decimetre of water at 4 °C, standardised as the mass of a man-made artefact of platinum–iridium held in a laboratory in France, which was used until a new definition was introduced in May 2019 . Replicas made in 1879 at the time of the artefact's fabrication and distributed to signatories of the Metre Convention serve as de facto standards of mass in those countries. Additional replicas have been fabricated since as additional countries have joined the convention. The replicas were subject to periodic validation by comparison to the original, called the IPK . It became apparent that either the IPK or the replicas or both were deteriorating, and are no longer comparable: they had diverged by 50 μg since fabrication, so figuratively, the accuracy of the kilogram was no better than 5 parts in a hundred million or a relative accuracy of 5 × 10 −8 . The revision of the SI replaced the IPK with an exact definition of the Planck constant as expressed in SI units, which defines the kilogram in terms of fundamental constants. [ 13 ] [ 14 ] [ 15 ]
Base and derived unit structure
A base quantity is one of a conventionally chosen subset of physical quantities, where no quantity in the subset can be expressed in terms of the others. A base unit is a unit adopted for expressing a base quantity. A derived unit is used for expressing any other quantity, and is a product of powers of base units. For example, in the modern metric system, length has the unit metre and time has the unit second, and speed has the derived unit metre per second. [ 5 ] : 15 Density, or mass per unit volume, has the unit kilogram per cubic metre. [ 5 ] : 434
A significant characteristic of the metric system is its use of decimal multiples – powers of 10. For example, a length that is significantly longer or shorter than 1 metre can be represented in units that are a power of 10 or 1000 metres. This differs from many older systems in which the ratio of different units varied. For example, 12 inches is one foot , but the larger unit in the same system, the mile is not a power of 12 feet. It is 5,280 feet – which is hard to remember for many. [ 5 ] : 17
In the early days, multipliers that were positive powers of ten were given Greek-derived prefixes such as kilo- and mega- , and those that were negative powers of ten were given Latin-derived prefixes such as centi- and milli- . However, 1935 extensions to the prefix system did not follow this convention: the prefixes nano- and micro- , for example have Greek roots. [ 16 ] : 222–223 During the 19th century the prefix myria- , derived from the Greek word μύριοι ( mýrioi ), was used as a multiplier for 10 000 . [ 17 ]
When applying prefixes to derived units of area and volume that are expressed in terms of units of length squared or cubed, the square and cube operators are applied to the unit of length including the prefix, as illustrated below. [ 4 ]
For the most part, the metric prefixes are used uniformly for SI units, but for large measures of seconds, the non-SI units of minute , hour and day are customary instead. [ 2 ]
Each variant of the metric system has a degree of coherence—the derived units are directly related to the base units without the need for intermediate conversion factors. [ 18 ] For example, in a coherent system the units of force , energy , and power are chosen so that the equations
hold without the introduction of unit conversion factors. Once a set of coherent units has been defined, other relationships in physics that use this set of units will automatically be true. Therefore, Einstein 's mass–energy equation , E = mc 2 , does not require extraneous constants when expressed in coherent units. [ 19 ]
The CGS system had two units of energy, the erg that was related to mechanics and the calorie that was related to thermal energy ; so only one of them (the erg) could bear a coherent relationship to the base units. Coherence was a design aim of SI, which resulted in only one unit of energy being defined – the joule . [ 20 ]
Rationalisation
Maxwell's equations of electromagnetism contained a factor of 1 / ( 4 π ) {\displaystyle 1/(4\pi )} relating to steradians , representative of the fact that electric charges and magnetic fields may be considered to emanate from a point and propagate equally in all directions, i.e. spherically. This factor made equations more awkward than necessary, and so Oliver Heaviside suggested adjusting the system of units to remove it. [ 21 ]
Everyday notions
The basic units of the metric system have always represented commonplace quantities or relationships in nature, even with modern refinements of definition and methodology. In cases where laboratory precision may not be required or available, or where approximations are good enough, the commonplace notions may suffice.
Time, length, volume and mass
The second is readily determined from the Earth's rotation period. Unlike other units, time multiples are not decimal. A second is 1 / 60 of a minute, which is 1 / 60 of an hour, which is 1 / 24 of a day, so a second is 1 / 86 400 of a day.
The length of the equator is close to 40 000 000 m (more precisely 40 075 014 .2 m ). [ 22 ] In fact, the dimensions of our planet were used by the French Academy in the original definition of the metre. [ 23 ] A dining tabletop is typically about 0.75 metres high. [ 24 ] A very tall human is about 2 metres tall. [ 25 ]
The mass of a litre of cold water is very close to 1 kilogram. [ 26 ] Therefore, 1 millilitre of water occupies 1 cubic centimetre and has a mass of 1 gram.
A 1-euro coin has a mass of 7.5 g; [ 27 ] a Sacagawea US 1-dollar coin has a mass of 8.1 g; [ 28 ] the mass of a UK 50-pence coin is 8.0 g. [ 29 ]
In everyday use, the Celsius scale is more commonly used than the Kelvin scale; however, a temperature difference of one kelvin is the same as one degree Celsius. A temperature in kelvins is the temperature on the Celsius scale plus about 273. Water freezes at about 0 °C (273 K) and boils at about 100 °C (373 K) at sea level; human body temperature is about 37 °C (310 K) .
A candela is about the luminous intensity of a moderately bright candle, or 1 candle power. A 60 watt tungsten-filament incandescent light bulb has a luminous intensity of about 800 lumens [ 30 ] which is radiated equally in all directions (i.e. 4 π steradians), thus is equal to I v = 800 lm / 4 π sr ≈ 64 cd .
A 60 W incandescent light bulb consumes 0.5 A at 120 V (US mains voltage). A 60 W bulb rated at 230 V (European mains voltage) consumes 0.26 A at this voltage. This is evident from the formula P = I V .
Mole and mass relationship
A mole of a substance has a mass that is its molecular mass expressed in units of grams. The mass of a mole of carbon is 12.0 g, and the mass of a mole of table salt is 58.4 g.
Since all gases have the same volume per mole at a given temperature and pressure far from their points of liquefaction and solidification (see Perfect gas ), and air is about 1 / 5 oxygen (molecular mass 32) and 4 / 5 nitrogen (molecular mass 28), the density of any near-perfect gas relative to air can be obtained to a good approximation by dividing its molecular mass by 29 (because 4 / 5 × 28 + 1 / 5 × 32 = 28.8 ≈ 29 ). For example, carbon monoxide (molecular mass 28) has almost the same density as air.
The metric system was the result of multiple attempts at standardisation of weights and measures over many centuries, as earlier (Chinese, Egyptian, Greek, Roman, and other) systems of weights and measures interacted with one another through global trade.
17th & 18th centuries
Around 1665–1670, Gabriel Mouton, a priest of the Collegiate Church of St Paul in Lyon , France, suggested that the many different systems of units then in use in France should be replaced by a single all-embracing decimal system. He proposed that linear measurements would be based on a natural standard of length, namely the length of one minute of arc of the largest circle that could be drawn round the Earth, and which he proposed to call one milliare. Mouton suggested that the unit of mass should be based on the unit of length, and on the mass density of water. While Mouton's contribution is sometimes overlooked, these ideas were clearly the basis over 120 years later, when the metric system was devised and standardised in France. [ 31 ] : 140–142 During the final days of France's Ancien régime (1775-1788) and the early days of the French Revolution (1789–99), the first metric system was devised by chemists Antoine and Anne-Marie Lavoisier for the benefit of the Ferme générale in return for financial support of Antoine Lavoisier's research.
Following the model established by Mouton, Lavoisier's unit of length, the metre, was based on the dimensions of the Earth , and the unit of mass , the kilogram, was based on the mass of 1 litre of water (the volume of water which occupies 1 cubic decimetre of space, using the same unit of length). [ 31 ] : 140–142
The backwardness of the Ancien Régime left France with a need to reform its numerous systems of various local weights and measures. In 1790, Charles Maurice de Talleyrand-Périgord proposed Lavoisier's system based on natural units to the French National Assembly , without reference to the prior work of Mouton and Lavoisier. The aim was global adoption of the metric system. With the United Kingdom not responding to requests to collaborate in the development of the system, the French Academy of Sciences established a commission to implement this new standard alone, and in 1799, the new system was launched in France. [ 31 ] : 145–149
A number of different metric systems have since been developed, all using the Mètre des Archives and Kilogramme des Archives (or their descendants) as their base units, but differing in the definitions of the various derived units.
In 1832, Gauss used the astronomical second as a base unit in defining the gravitation of the Earth, and together with the milligram and millimetre, this became the first system of mechanical units . He showed that the strength of a magnet could also be quantified in terms of these units, by measuring the oscillations of a magnetised needle and finding the quantity of "magnetic fluid" that produces an acceleration of one unit when applied to a unit mass. [ 32 ] [ 33 ] The centimetre–gram–second system of units (CGS) was the first coherent metric system, having been developed in the 1860s and promoted by James Clerk Maxwell and Lord Kelvin . In 1874, this system was formally promoted by the British Association for the Advancement of Science (BAAS). [ 34 ] The system's characteristics are that density is expressed in g/cm 3 , force expressed in dynes and mechanical energy in ergs . Thermal energy was defined in calories , one calorie being the energy required to raise the temperature of one gram of water from 15.5 °C to 16.5 °C. The Association also recognised two sets of units for electrical and magnetic properties – the electrostatic set of units and the electromagnetic set of units. [ 35 ]
The CGS units of electricity were cumbersome to work with. This was remedied at the 1893 International Electrical Congress held in Chicago by defining the "international" ampere and ohm using definitions based on the metre , kilogram and second , in the International System of Electrical and Magnetic Units . [ 36 ] During the same period in which the CGS system was being extended to include electromagnetism, other systems were developed, distinguished by their choice of coherent base unit, including the Practical System of Electric Units , or QES (quad–eleventhgram–second) system. Here, the base units are the quad, equal to 10 7 m (approximately a quadrant of the Earth's circumference), the eleventhgram, equal to 10 −11 g , and the second. These were chosen so that the corresponding electrical units of potential difference, current and resistance had a convenient magnitude. [ 37 ] : 268 [ 38 ] : 17
In 1901, Giovanni Giorgi showed that by adding an electrical unit as a fourth base unit, the various anomalies in electromagnetic systems could be resolved. The metre–kilogram–second– coulomb (MKSC) and metre–kilogram–second– ampere (MKSA) systems are examples of such systems. [ 39 ] [ 21 ]
The metre–tonne–second system of units (MTS) was based on the metre, tonne and second – the unit of force was the sthène and the unit of pressure was the pièze . It was invented in France for industrial use and from 1933 to 1955 was used both in France and in the Soviet Union . [ 40 ] [ 41 ] Gravitational metric systems use the kilogram-force (kilopond) as a base unit of force, with mass measured in a unit known as the hyl , Technische Masseneinheit (TME), mug or metric slug . [ 42 ] Although the CGPM passed a resolution in 1901 defining the standard value of acceleration due to gravity to be 980.665 cm/s 2 , gravitational units are not part of the International System of Units (SI). [ 43 ]
The International System of Units is the modern metric system. It is based on the metre–kilogram–second–ampere (MKSA) system of units from early in the 20th century. [ 20 ] It also includes numerous coherent derived units for common quantities like power (watt) and irradience (lumen). Electrical units were taken from the International system then in use. Other units like those for energy (joule) were modelled on those from the older CGS system, but scaled to be coherent with MKSA units. Two additional base units – the kelvin , which is equivalent to degree Celsius for change in thermodynamic temperature but set so that 0 K is absolute zero , and the candela , which is roughly equivalent to the international candle unit of illumination – were introduced. Later, another base unit, the mole , a unit of amount of substance equivalent to the Avogadro number number of specified molecules, was added along with several other derived units. [ 44 ]
The system was promulgated by the General Conference on Weights and Measures (French: Conférence générale des poids et mesures – CGPM) in 1960. At that time, the metre was redefined in terms of the wavelength of a spectral line of the krypton-86 atom (krypton-86 being a stable isotope of an inert gas that occurs in undetectable or trace amounts naturally), and the standard metre artefact from 1889 was retired. [ 5 ] : 16
Today, the International System of Units consists of 7 base units and innumerable coherent derived units including 22 with special names. The last new derived unit, the katal for catalytic activity, was added in 1999. All the base units except the second are now defined in terms of exact and invariant constants of physics or mathematics, barring those parts of their definitions which are dependent on the second itself. As a consequence, the speed of light has now become an exactly defined constant, and defines the metre as 1 ⁄ 299,792,458 of the distance light travels in a second. The kilogram was defined by a cylinder of platinum-iridium alloy until a new definition in terms of natural physical constants was adopted in 2019. As of 2022, the range of decimal prefixes has been extended to those for 10 30 ( quetta– ) and 10 −30 ( quecto– ). [ 45 ]
Binary prefix – Prefix indicating a power of two
Electrostatic units – Variant of the metric system Pages displaying short descriptions of redirect targets
History of measurement
ISO 31 – Superseded standard on quantities and units
ISO/IEC 80000 – International standard on physical quantities and units of measurement
List of metric units – Class of units of measurement
Metrology – Science of measurement and its application
Outline of metrology and measurement – Topical index of English Wikipedia articles about metrology and measurement
Preferred metric sizes – Metricated industry standards
Unified Code for Units of Measure – System of codes for unambiguously representing measurement units
↑ "The International System of Units (SI), 9th Edition" (PDF) . Bureau International des Poids et Mesures. 2019. Archived (PDF) from the original on 30 May 2019.
1 2 "SI-Brochure-9" . BIPM (4.01 ed.). June 2026. pp. 140– 141. doi : 10.59161/AUEZ1291 . Retrieved 8 June 2026 .
↑ Gullberg, Jan (1997). "2.4 Decimal Position System". Mathematics from the Birth of Numbers . New York and London: W. W. Norton and Company. p. 52. ISBN 978-0-393-04002-9 .
1 2 International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), pp. 121, 122, ISBN 92-822-2213-6 , archived (PDF) from the original on 4 June 2021 , retrieved 16 December 2021
1 2 3 4 5 Urone, Peter Paul; Hinrichs, Roger; Dirks, Kim; Sharma, Manjula (2020). College Physics . OpenStax. ISBN 978-1-947172-01-2 . Archived from the original on 2 July 2023 . Retrieved 2 July 2023 .
↑ Dybkær, René (1 March 2002). "The Tortuous Road to the Adoption of katal for the Expression of Catalytic Activity by the General Conference on Weights and Measures" . Clinical Chemistry . 48 (3): 586– 590. doi : 10.1093/clinchem/48.3.586 . ISSN 0009-9147 . PMID 11861460 .
↑ "What is a mise en pratique ?" . BIPM . 2011. Archived from the original on 28 March 2014 . Retrieved 11 March 2011 .
↑ "OIML Mutual Acceptance Arrangement (MAA)" . International Organization of Legal Metrology . Archived from the original on 21 May 2013 . Retrieved 23 April 2013 .
↑ Alder, Ken (2002). The Measure of all Things—The Seven-Year-Odyssey That Transformed the World . London: Abacus. ISBN 978-0-349-11507-8 .
↑ "17th General Conference on Weights and Measures (1983), Resolution 1" . Archived from the original on 16 June 2023 . Retrieved 17 June 2023 .
↑ "Mise en pratique for the definition of the metre in the SI" . BIPM . 20 May 2019 . Retrieved 17 June 2023 .
↑ Lewis, A. (4 July 2019). 1983 realisation of the metre definition (PDF) . Varenna Summer School. National Physical Laboratory. p. 15. Archived (PDF) from the original on 10 July 2023 . Retrieved 10 July 2023 .
↑ "The Latest: Landmark Change to Kilogram Approved" . AP News . Associated Press. 16 November 2018. Archived from the original on 29 December 2022 . Retrieved 17 June 2023 .
↑ "Mise en pratique for the definition of the kilogram in the SI" . BIPM . 7 July 2021 . Retrieved 17 June 2023 .
↑ Resnick, Brian (20 May 2019). "The new kilogram just debuted. It's a massive achievement" . Vox . Retrieved 17 June 2023 .
↑ McGreevy, Thomas (1997). Cunningham, Peter (ed.). The Basis of Measurement: Volume 2—Metrication and Current Practice . Chippenham: Picton Publishing. ISBN 978-0-948251-84-9 .
↑ Brewster, D. (1830). The Edinburgh Encyclopædia . p. 494 .
↑ Working Group 2 of the Joint Committee for Guides in Metrology (JCGM/WG 2). (2008), International vocabulary of metrology – Basic and general concepts and associated terms (VIM) (PDF) (3rd ed.), International Bureau of Weights and Measures (BIPM) on behalf of the Joint Committee for Guides in Metrology, 1.12, archived (PDF) from the original on 10 January 2011 , retrieved 12 April 2012 {{ citation }} : CS1 maint: numeric names: authors list ( link )
↑ Good, Michael. "Some Derivations of E = mc 2 " (PDF) . Archived from the original (PDF) on 7 November 2011 . Retrieved 18 March 2011 .
1 2 International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), pp. 111– 120, ISBN 92-822-2213-6 , archived (PDF) from the original on 4 June 2021 , retrieved 16 December 2021
1 2 Jayson, Joel S. (January 2014). "The Daniell cell, Ohm's law, and the emergence of the International System of Units" . American Journal of Physics . 82 (1): 60– 65. arXiv : 1512.07306 . Bibcode : 2014AmJPh..82...60J . doi : 10.1119/1.4826445 . ISSN 0002-9505 . S2CID 119278961 .
↑ Science, Tim Sharp 2017-09-15T15:47:00Z; Astronomy. "How Big Is Earth?" . Space.com . Archived from the original on 9 January 2024 . Retrieved 22 October 2019 . {{ cite web }} : CS1 maint: numeric names: authors list ( link )
↑ "Metre | measurement" . Encyclopædia Britannica . Archived from the original on 1 July 2025 . Retrieved 22 October 2019 .
↑ "Standard Table Sizes" . Bassett Furniture . Retrieved 22 October 2019 .
↑ "The Average Height of NBA Players – From Point Guards to Centers" . The Hoops Geek . 9 December 2018. Archived from the original on 22 October 2019 . Retrieved 22 October 2019 .
↑ Franks, Felix (2012). The Physics and Physical Chemistry of Water . Springer. ISBN 978-1-4684-8334-5 .
↑ "RUBINGHSCIENCE.ORG / Using Euro coins as weights" . www.rubinghscience.org . Archived from the original on 7 September 2019 . Retrieved 22 October 2019 .
↑ "Coin Specifications | U.S. Mint" . www.usmint.gov . 20 September 2016. Archived from the original on 6 May 2022 . Retrieved 22 October 2019 .
↑ "Fifty Pence Coin" . www.royalmint.com . Archived from the original on 21 November 2019 . Retrieved 22 October 2019 .
↑ "Lumens and the Lighting Facts Label" . Energy.gov . Archived from the original on 1 August 2021 . Retrieved 11 June 2020 .
1 2 3 McGreevy, Thomas (1995). Cunningham, Peter (ed.). The Basis of Measurement: Volume 1—Historical Aspects . Chippenham: Picton Publishing. ISBN 978-0-948251-82-5 .
↑ O'Hara, James Gabriel (1983). "Gauss and the Royal Society: The Reception of His Ideas on Magnetism in Britain (1832-1842)" . Notes and Records of the Royal Society of London . 38 (1): 17– 78. doi : 10.1098/rsnr.1983.0002 . ISSN 0035-9149 . JSTOR 531344 . S2CID 145724822 . Archived from the original on 26 June 2023 . Retrieved 26 June 2023 .
↑ Van Baak, D. A. (October 2013). "Re-creating Gauss's method for non-electrical absolute measurements of magnetic fields and moments" . American Journal of Physics . 81 (10): 738– 744. Bibcode : 2013AmJPh..81..738V . doi : 10.1119/1.4816806 . ISSN 0002-9505 .
↑ International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 109, ISBN 92-822-2213-6 , archived (PDF) from the original on 4 June 2021 , retrieved 16 December 2021
↑ Thomson, William; Joule, James Prescott; Maxwell, James Clerk; Jenkin, Flemming (1873). "First Report – Cambridge 3 October 1862" . In Jenkin, Flemming (ed.). Reports on the Committee on Standards of Electrical Resistance – Appointed by the British Association for the Advancement of Science . London. pp. 1– 3 . Retrieved 12 May 2011 . {{ cite book }} : CS1 maint: location missing publisher ( link )
↑ "Historical context of the SI—Unit of electric current (ampere)" . The NIST Reference on Constants, Units and Uncertainty. Archived from the original on 25 April 2017 . Retrieved 10 April 2011 .
↑ James Clerk Maxwell (1954) [1891], A Treatise on Electricity & Magnetism , vol. 2 (3rd ed.), Dover Publications
↑ Carron, Neal (2015). "Babel of Units. The Evolution of Units Systems in Classical Electromagnetism". arXiv : 1506.01951 [ physics.hist-ph ].
↑ "In the beginning... Giovanni Giorgi" . International Electrotechnical Commission . 2011. Archived from the original on 15 May 2011 . Retrieved 5 April 2011 .
↑ "System of Measurement Units" . IEEE Global History Network . Institute of Electrical and Electronics Engineers (IEEE). Archived from the original on 21 August 2014 . Retrieved 21 March 2011 .
↑ "Notions de physique – Systèmes d'unités" [ Symbols used in physics – units of measure ] (in French). Hydrelect.info. Archived from the original on 2 May 2019 . Retrieved 21 March 2011 .
↑ Michon, Gérard P (9 September 2000). "Final Answers" . Numericana.com. Archived from the original on 21 December 2022 . Retrieved 11 October 2012 .
↑ "Resolution of the 3rd meeting of the CGPM (1901)" . General Conference on Weights and Measures. Archived from the original on 14 May 2013 . Retrieved 11 October 2012 .
↑ IUPAC Gold Book. IUPAC – mole (M03980) . International Union of Pure and Applied Chemistry . doi : 10.1351/goldbook.M03980 . S2CID 241546445 . Archived from the original on 1 June 2023 . Retrieved 10 July 2023 .
↑ "New SI prefixes clear the way for quettabytes of storage" . The Register. 22 November 2022 . Retrieved 23 November 2022 .
Learning materials related to Using the Metric System at Wikiversity
International System of Units (SI)
UK imperial system
US customary system (USCS/USC)
English Engineering Units (US)
Heaviside–Lorentz
Quantum chromodynamical
Foot–pound–second (FPS)
metre–kilogram–second (MKS)
metre–tonne–second (MTS)
centimetre–gram–second (CGS)
Chinese Hong Kongese
English Winchester Exchequer
French Traditional Mesures usuelles
Mesures usuelles
Greek Byzantine
Biblical and Talmudic
Constitutional monarchy
Day of the Tiles (7 Jun 1788)
Assembly of Vizille (21 Jul 1788)
What Is the Third Estate? (Jan 1789)
Réveillon riots (28 Apr 1789)
Convocation of the Estates General (5 May 1789)
Death of the Dauphin (4 June 1789)
National Assembly (17 Jun – 9 Jul 1790)
Tennis Court Oath (20 Jun 1789)
National Constituent Assembly (9 Jul – 30 Sep 1791)
Storming of the Bastille (14 Jul 1789)
Great Fear (20 Jul – 5 Aug 1789)
Abolition of Feudalism (4–11 Aug 1789)
Declaration of the Rights of Man and of the Citizen (26 Aug 1789)
Women's March on Versailles (5 Oct 1789)
Nationalization of the Church properties (2 Nov 1789)
Abolition of the Parlements (Feb–Jul 1790)
Avignon–Comtat Venaissin War (Jun 1790 – 1791)
Abolition of the Nobility (23 Jun 1790)
Civil Constitution of the Clergy (12 Jul 1790)
Fête de la Fédération (14 Jul 1790)
Flight to Varennes (20–21 Jun 1791)
Champ de Mars massacre (17 Jul 1791)
Declaration of Pillnitz (27 Aug 1791)
The Constitution of 1791 (3 Sep 1791)
National Legislative Assembly (1 Oct 1791 – Sep 1792)
France declares war (20 Apr 1792)
Brunswick Manifesto (25 Jul 1792)
Paris Commune becomes insurrectionary (Jun 1792)
10th of August (10 Aug 1792)
September Massacres (Sep 1792)
National Convention (20 Sep 1792 – 26 Oct 1795)
First republic declared (22 Sep 1792)
Execution of Louis XVI (21 Jan 1793)
Revolutionary Tribunal (9 Mar 1793 – 31 May 1795)
Reign of Terror (27 Jun 1793 – 27 Jul 1794) Committee of Public Safety Committee of General Security
Committee of Public Safety
Committee of General Security
Fall of the Girondists (2 Jun 1793)
Assassination of Marat (13 Jul 1793)
Levée en masse (23 Aug 1793)
The Death of Marat (painting)
Law of Suspects (17 Sep 1793)
Marie Antoinette is guillotined (16 Oct 1793)
Anti-clerical laws (throughout the year)
Danton and Desmoulins guillotined (5 Apr 1794)
Law of 22 Prairial (10 Jun 1794)
Thermidorian Reaction (27 Jul 1794)
Robespierre guillotined (28 Jul 1794)
White Terror (Fall 1794)
Closing of the Jacobin Club (11 Nov 1794)
Insurrection of 12 Germinal Year III (1 Apr 1795)
Constitution of the Year III (22 Aug 1795)
Directoire (1795–99) Council of Five Hundred Council of Ancients
Council of Five Hundred
Council of Ancients
13 Vendémiaire (5 Oct 1795)
Conspiracy of the Equals (May 1796)
Coup of 18 Fructidor (4 Sep 1797)
Second Congress of Rastatt (Dec 1797)
Law of 22 Floréal Year VI (11 May 1798)
Coup of 30 Prairial VII (18 Jun 1799)
Coup of 18 Brumaire (9 Nov 1799)
Constitution of the Year VIII (24 Dec 1799)
Royalist Revolts Chouannerie Vendée Dauphiné
First Coalition
War in the Vendée
Battle of Neerwinden
Battle of Famars (23 May 1793)
Expedition to Sardinia (21 Dec 1792 – 25 May 1793)
Battle of Kaiserslautern
Battle of Wattignies
Battle of Hondschoote
Siege of Bellegarde
Battle of Peyrestortes (Pyrenees)
Siege of Toulon (18 Sep – 18 Dec 1793)
First Battle of Wissembourg (13 Oct 1793)
Battle of Truillas (Pyrenees)
Second Battle of Wissembourg (26–27 Dec 1793)
Battle of Villers-en-Cauchies (24 Apr 1794)
Second Battle of Boulou (Pyrenees) (30 Apr – 1 May 1794)
Battle of Tourcoing (18 May 1794)
Battle of Tournay (22 May 1794)
Glorious First of June (1 Jun 1794)
Battle of Fleurus (26 Jun 1794)
Battle of Aldenhoven (2 Oct 1794)
Siege of Luxembourg (22 Nov 1794 – 7 Jun 1795)
Siege of Luxembourg (22 Nov 1794 – 7 Jun 1795)
Italian campaign (1796)
Battle of Lonato (3–4 Aug 1796)
Battle of Castiglione (5 Aug 1796)
Battle of Theiningen
Battle of Neresheim (11 Aug 1796)
Battle of Amberg (24 Aug 1796)
Battle of Würzburg (3 Sep 1796)
Battle of Rovereto (4 Sep 1796)
First Battle of Bassano (8 Sep 1796)
Battle of Emmendingen (19 Oct 1796)
Battle of Schliengen (26 Oct 1796)
Second Battle of Bassano (6 Nov 1796)
Battle of Calliano (6–7 Nov 1796)
Battle of Arcole (15–17 Nov 1796)
Ireland expedition (Dec 1796)
Italian campaign (1797)
Battle of Rivoli (14–15 Jan 1797)
Battle of Cape St. Vincent (14 February 1797)
Peace of Leoben (17 Apr 1797)
Battle of Neuwied (18 Apr 1797)
Treaty of Campo Formio (17 Oct 1797)
French invasion of Switzerland (28 January – 17 May 1798)
French invasion of Egypt (1798–1801)
Irish Rebellion of 1798 (23 May – 23 Sep 1798)
Quasi-War (1798–1800)
Peasants' War (12 Oct – 5 Dec 1798)
Second Coalition (1798–1802)
Siege of Acre (20 Mar – 21 May 1799)
Battle of Ostrach (20–21 Mar 1799)
Battle of Stockach (25 Mar 1799)
Battle of Magnano (5 Apr 1799)
Battle of Cassano (27–28 Apr 1799)
First Battle of Zurich (4–7 Jun 1799)
Battle of Trebbia (17–20 Jun 1799)
Battle of Novi (15 Aug 1799)
Second Battle of Zurich (25–26 Sep 1799)
Battle of Marengo (14 Jun 1800)
Convention of Alessandria (15 Jun 1800)
Battle of Hohenlinden (3 Dec 1800)
League of Armed Neutrality (1800–02)
Treaty of Lunéville (9 Feb 1801)
Treaty of Florence (18 Mar 1801)
Algeciras campaign (8 Jul 1801)
Treaty of Amiens (25 Mar 1802)
Treaty of Paris (25 Jun 1802)
Eustache Charles d'Aoust
Charles-Pierre Augereau
Alexandre de Beauharnais
Jean-Baptiste Bernadotte
Louis-Alexandre Berthier
Jean-Baptiste Bessières
Napoléon Bonaparte
Guillaume Brune
Jean François Carteaux
Jean-Étienne Championnet
Chapuis de Tourville
Adam Philippe, Comte de Custine
Louis-Nicolas Davout
Jacques François Dugommier
Thomas-Alexandre Dumas
Charles François Dumouriez
Pierre Marie Barthélemy Ferino
Louis-Charles de Flers
Emmanuel de Grouchy
Jacques Maurice Hatry
Jean-Baptiste Jourdan
François Christophe de Kellermann
Jean-Baptiste Kléber
Pierre Choderlos de Laclos
Charles Leclerc
Claude Lecourbe
François Joseph Lefebvre
Étienne Macdonald
Jean-Antoine Marbot
Marcellin Marbot
François Séverin Marceau
Auguste de Marmont
Bon-Adrien Jeannot de Moncey
Jean Victor Marie Moreau
Édouard Mortier, Duke of Trévise
Pierre-Jacques Osten
Nicolas Oudinot
Catherine-Dominique de Pérignon
Jean-Charles Pichegru
Józef Poniatowski
Laurent de Gouvion Saint-Cyr
Barthélemy Louis Joseph Schérer
Jean-Mathieu-Philibert Sérurier
Jean-de-Dieu Soult
Louis-Gabriel Suchet
Belgrand de Vaubois
Claude Victor-Perrin, Duc de Belluno
Charles-Alexandre Linois
József Alvinczi
Archduke Charles, Duke of Teschen
Count of Clerfayt (Walloon)
Karl Aloys zu Fürstenberg
Heinrich XV, Prince Reuss of Greiz
Friedrich Freiherr von Hotze (Swiss)
Friedrich Adolf, Count von Kalckreuth
Pál Kray (Hungarian)
Charles Eugene, Prince of Lambesc (French)
Maximilian Baillet de Latour (Walloon)
Karl Mack von Leiberich
Rudolf Ritter von Otto (Saxon)
Prince Josias of Saxe-Coburg-Saalfeld
Peter Vitus von Quosdanovich
Johann Mészáros von Szoboszló (Hungarian)
Karl Philipp Sebottendorf
Dagobert von Wurmser
Ralph Abercromby
James Saumarez, 1st Baron de Saumarez
Edward Pellew, 1st Viscount Exmouth
Prince Frederick, Duke of York and Albany
William V, Prince of Orange
Charles William Ferdinand, Duke of Brunswick
Frederick Louis, Prince of Hohenlohe-Ingelfingen
Alexander Korsakov
Alexander Suvorov
Andrei Rosenberg
Luis Fermin de Carvajal
Antonio Ricardos
Jean Sylvain Bailly
Gilbert du Motier, Marquis de Lafayette
François Alexandre Frédéric, duc de la Rochefoucauld-Liancourt
Isaac René Guy le Chapelier
Honoré Gabriel Riqueti, comte de Mirabeau
Emmanuel Joseph Sieyès
Charles Maurice de Talleyrand-Périgord
Nicolas de Condorcet
Arnaud de La Porte
Jean-Sifrein Maury
François-Marie, marquis de Barthélemy
Guillaume-Mathieu Dumas
Antoine Barnave
Alexandre-Théodore-Victor, comte de Lameth
Charles Malo François Lameth
Jean-François Rewbell
Madame de Staël
Boissy d'Anglas
Jean-Charles Pichegru
Pierre Paul Royer-Collard
Bertrand Barère de Vieuzac
Jacques Pierre Brissot
Jean-Marie Roland de la Platière
Father Henri Grégoire
Étienne Clavière
Marquis de Condorcet
Charlotte Corday
Marie Jean Hérault
Jean Baptiste Treilhard
Pierre Victurnien Vergniaud
Jérôme Pétion de Villeneuve
Olympe de Gouges
Jean-Baptiste Robert Lindet
Louis Marie de La Révellière-Lépeaux
Charles-François Lebrun
Pierre-Joseph Cambon
Bertrand Barère
Lazare Nicolas Marguerite Carnot
Philippe Égalité
Louis Philippe I
Antoine Christophe Merlin de Thionville
Jean Joseph Mounier
Pierre Samuel du Pont de Nemours
Nicolas François de Neufchâteau
Maximilien Robespierre
Jean-Paul Marat
Camille Desmoulins
Louis Antoine de Saint-Just
Louis Philippe I
Louis Michel le Peletier de Saint-Fargeau
Jacques-Louis David
Marquis de Sade
Georges Couthon
Jean-Marie Collot d'Herbois
Jean-Henri Voulland
Philippe-Antoine Merlin de Douai
Antoine Quentin Fouquier-Tinville
Philippe-François-Joseph Le Bas
Marc-Guillaume Alexis Vadier
Jean-Pierre-André Amar
Prieur de la Côte-d'Or
Jeanbon Saint-André
Jean-Lambert Tallien
Pierre Louis Prieur
Antoine Christophe Saliceti
Jacques-Nicolas Billaud-Varenne
Pierre Gaspard Chaumette
Charles-Philippe Ronsin
Antoine-François Momoro
François-Nicolas Vincent
François Chabot
Jean Baptiste Noël Bouchotte
Jean-Baptiste-Joseph Gobel
François Hanriot
Stanislas-Marie Maillard
Charles-Philippe Ronsin
Jean-François Varlet
Theophile Leclerc
Gracchus Babeuf
Sylvain Maréchal
Louis Antoine, Duke of Enghien
Louis Henri, Prince of Condé
Louis Joseph, Prince of Condé
Marie Antoinette
Napoléon Bonaparte
Lucien Bonaparte
Joseph Bonaparte
Joséphine de Beauharnais
Jean Sylvain Bailly
Jacques-Donatien Le Ray
Guillaume-Chrétien de Malesherbes
Thérésa Tallien
Gui-Jean-Baptiste Target
Catherine Théot
Madame de Lamballe
Madame du Barry
Louis de Breteuil
de Chateaubriand
Loménie de Brienne
Charles Alexandre de Calonne
Jean-Jacques Duval d'Eprémesnil
List of people associated with the French Revolution
Jacobins Cordeliers Panthéon Club
Influence of the American Revolution on the French Revolution
Anacharsis Cloots
Charles-Augustin de Coulomb
Benjamin Franklin
Thomas Jefferson
Antoine Lavoisier
Jean-Jacques Rousseau
Mary Wollstonecraft
La Marseillaise
Cockade of France
Bals des victimes
Liberté, égalité, fraternité
French Republican calendar
Declaration of the Rights of Man and of the Citizen
Cult of the Supreme Being
Cult of Reason Temple of Reason
Temple of Reason
Napoleonic Code
Tree of Liberty
Women in the French Revolution
Incroyables and merveilleuses
Symbolism in the French Revolution
Historiography of the French Revolution
Influence of the French Revolution
Historical Dictionary of Switzerland
Encyclopedia of Modern Ukraine
International System of Units
French inventions
Articles with short description
Short description is different from Wikidata
Use dmy dates from December 2018
Use British English from August 2021
All Wikipedia articles written in British English
CS1 maint: numeric names: authors list
CS1 maint: location missing publisher
CS1 French-language sources (fr)
Pages displaying short descriptions of redirect targets via Module:Annotated link
Articles containing French-language text